Is 3T MR nerve-bone fusion imaging a viable alternative to MRI-CBCT to identify the relationship between the inferior alveolar nerve and mandibular third molar.

OBJECTIVES: To investigate the feasibility of MRI nerve-bone fusion imaging in assessing the relationship between inferior alveolar nerve (IAN) / mandibular canal (MC) and mandibular third molar (MTM) compared with MRI-CBCT fusion. MATERIALS AND METHODS: The MRI nerve-bone fusion and MRI-CBCT fusion imaging were performed in 20 subjects with 37 MTMs. The Hausdorff distance (HD) value and dice similarity coefficient (DSC) was calculated. The relationship between IAN/MC and MTM roots, inflammatory, and fusion patterns were compared between these two fused images. The reliability was assessed using a weighted κ statistic. RESULTS: The mean HD and DSC ranged from 0.62 ~ 1.35 and 0.83 ~ 0.88 for MRI nerve-bone fusion, 0.98 ~ 1.50 and 0.76 ~ 0.83 for MRI-CBCT fusion. MR nerve-bone fusion had considerable reproducibility compared to MRI-CBCT fusion in relation classification (MR nerve-bone fusion κ = 0.694, MRI-CBCT fusion κ = 0.644), direct contact (MR nerve-bone fusion κ = 0.729, MRI-CBCT fusion κ = 0.720), and moderate to good agreement for inflammation detection (MR nerve-bone fusion κ = 0.603, MRI-CBCT fusion κ = 0.532, average). The MR nerve-bone fusion imaging showed a lower ratio of larger pattern compared to MR-CBCT fusion (16.2% VS 27.3% in the molar region, and 2.7% VS 5.4% in the retromolar region). And the average time spent on MR nerve-bone fusion and MRI-CBCT fusion was 1 min and 3 min, respectively. CONCLUSIONS: Both MR nerve-bone fusion and MRI-CBCT fusion exhibited good consistency in evaluating the spatial relationship between IAN/MC and MTM, fusion effect, and inflammation detection. CLINICAL RELEVANCE: MR nerve-bone fusion imaging can be a preoperative one-stop radiation-free examination for patients at high risk for MTM surgery.

Two-year clinical and radiographic evaluation of ACTIVA BioACTIVE versus Compomer (Dyract® eXtra) in the restoration of class-2 cavities of primary molars: a non-inferior split-mouth randomised clinical trial.

OBJECTIVES: The trial aimed to compare the clinical performance and radiographic success of ACTIVA BioACTIVE versus Compomer in restoring class-II cavities of primary molars. MATERIALS AND METHODS: A non-inferior split-mouth design was considered. A pre-calculated sample size of 96 molars (48 per group) with class-2 cavities of twenty-one children whose ages ranged from 5 to 10 years were randomly included in the trial. Pre-operative Plaque Index (PI), DMFT/dmft scores and the time required to fill the cavity were recorded. Over 24 months, the teeth were clinically evaluated every six months and radiographically every 12 months by two calibrated and blinded evaluators using the United States public health service (USPHS)-Ryge criteria. The two-sided 95% confidence interval (CI) for the difference in success rate was considered to assess non-inferiority, and the margin was set at -18%. The linear mixed model and Firth's logistic regression model were used for data analysis (P < 0.05). RESULTS: After 24 months, 86 teeth (43 per group) were evaluated. The mean PI score was 1.1(± 0.9), while DMFT/dmft was 0.35 (± 0.74) and 6.55 (± 2.25) respectively. The clinical and radiographic success rate of Dyract vs. ACTIVA was 95.3% and 88.3% vs. 93% and 86%, respectively. The two-sided 95% CI for the difference in success rate (-2.3%) was - 3.2 to 1.3% and didn't reach the predetermined margin of -18% which had been anticipated as the non-inferiority margin. Clinically, ACTIVA had a significantly better colour match (P = 0.002) but worse marginal discolouration (P = 0.0143). There were no significant differences regarding other clinical or radiographic criteria (P > 0.05). ACTIVA took significantly less placement time than Dyract, with a mean difference of 2.37 (± 0.63) minutes (P < 0.001). CONCLUSION: The performance of ACTIVA was not inferior to Dyract and both materials had a comparable high clinical and radiographic performance in children with high-caries experience. ACTIVA had a significantly better colour match but more marginal discolouration. It took significantly less time to be placed in the oral cavity. TRIAL REGISTRATION: The study was registered at ClinicalTrials.gov on 4 May 2018 (#NCT03516838).

Successful Healing of Periapical Pathology with Partial Pulpotomy in a Mature Permanent Molar: A Case Report.

BACKGROUND Vital pulp therapy approaches are preferred over non-surgical root canal treatment, giving the advantage of preserving the vitality of the dental pulp and thus maintaining its benefits. Such approaches can be performed in teeth having normal apical area; however, performing vital pulp therapy approaches in teeth associated with periapical pathology remains controversial. CASE REPORT We present a case of a mature mandibular right first permanent molar tooth in a medically fit 10-year-old female diagnosed as asymptomatic irreversible pulpitis with asymptomatic apical periodontitis with periapical radiolucency having a periapical index (PAI) score of 4. Partial pulpotomy was performed instead of non-surgical root canal treatment due to uncooperativeness of the patient. Biodentine was used as a pulp capping material. The tooth was restored with resin composite permanent restoration. Six months after the procedure, an intraoral periapical radiograph revealed normal bone features with complete periapical pathology healing and development of intact lamina dura around the mesial and distal roots. The tooth responded normal to electric pulp testing (EPT), cold, percussion, and palpation tests. CONCLUSIONS Periapical pathology involvement having large periapical radiolucency exhibiting PAI score 4 in inflamed dental pulp tooth diagnosed as irreversible pulpitis does not necessitate non-surgical root canal treatment. Partial pulpotomy should be considered as an alternative treatment to promote the return dental pulp and periapical tissue to a healthy condition. Considering a similar approach in older patients would be interesting to gain a more comprehensive understanding of its potential as a treatment method.

Factors influencing root resorption in retained mandibular second deciduous molars with congenital absence of second premolars: a cross-sectional study.

BACKGROUND: There are currently no studies that quantitatively compare the relationship of root resorption to the patient's systemic history or craniofacial and intraoral morphology, especially in relation to possible host factors. Thus, this study aimed to clarify the factors associated with root resorption in retained mandibular second deciduous molars with the congenital absence of second premolars and predict the prognosis of retained mandibular second deciduous molars. METHODS: A cohort of 5547 patients who visited the orthodontic clinic at Tokyo Medical and Dental University Dental Hospital between 2013 and 2022 was screened. Lateral cephalometric radiographs, panoramic radiographs, upper and lower dental models, and orthodontic treatment questionnaires were used as reference materials to apply the inclusion and exclusion criteria. Ultimately, 111 patients were included in the analyses. The patients were divided into two groups based on the root resorption levels of the retained mandibular second deciduous molars. Those with less root resorption were classified under the good condition (GC) group, whereas those with more root resorption were classified under the poor condition (PC) group. Demographic, clinical, and cephalometric parameters were compared between the groups. A multivariate logistic regression model was used to predict the probability of root resorption. RESULTS: The prevalence of congenitally missing mandibular second premolars with persistent mandibular second deciduous molars was 2.0%. In a total of 111 patients, eighty-three teeth (53.2%) were classified into the GC group, whereas 73 teeth (46.8%) were classified into the PC group. The Frankfort-mandibular plane angle (FMA) [odds ratio (OR): 0.87], Frankfort-mandibular incisor angle (FMIA) (OR: 0.93), overbite (OR: 1.38), adjacent interdental space (OR: 1.46), distance from occlusal plane (OR: 0.80), and caries treatment (OR: 7.05) were significantly associated with the root resorption of the retained mandibular second deciduous molars. CONCLUSIONS: Our findings suggest that skeletal morphology, oral morphological patterns, and history contribute to root resorption in retained mandibular second deciduous teeth with congenital absence of subsequent permanent teeth.

Comparative evaluation of volumetric changes between two pediatric rotary files (Kedo-S plus, Kedo-SG blue) and manual files (hand K-files) during canal preparation of primary mandibular molars: an in-vitro nano-CT analysis.

Pediatric endodontics has become popular due to advancements in cleaning, shaping and irrigation systems, resulting in faster and effective removal of infected pulp, saving time, and creating a pathogen-free environment. The patented rotary file system, Kedo-S, designed for primary teeth, introduced a single file generation for efficient pulp therapy. However, there are currently no studies assessing canal preparation in primary mandibular molars using nano-CT (computed Tomography). To evaluate the volumetric changes of two recently introduced pediatric rotary file systems in comparison with conventional hand file systems in primary mandibular molar using an ultra-high resolution nano-CT. This in-vitro study was performed in extracted primary mandibular molar based on certain inclusion and exclusion criteria. Samples were prepared and working length was determined before the pre-operative scan using a high resolution nano-CT device (SkyScan 2214, Bruker, Kontich, Belgium). A single well-experienced pediatric dentist prepared the canals using three file systems: Kedo-S plus, Kedo-SG blue and Hand K-files. A post-operative scan was performed similar to pre-operative scan. Image reconstruction was performed with NRecon software for 3D volumetric visualization and analysis of the root canals. Kedo-SG blue file systems had the highest mean difference in the canal volume (8.85%). Hand K-files had the least difference at (1.24%) of canal volume. Kedo-S plus file system had a mean canal volume difference (6.14%) which is closer to hand K-files. Rotary file systems resulted in a significant enlargement of canals compared to hand files.

Influence of Different Glide Path Techniques on Microcrack Formation after Two Different Root Canal Preparation Treatments: Micro Computed Tomography Analysis.

OBJECTIVE: This study aimed to evaluate the effect of WaveOne Glider (WOGG) with Waveone Gold (WOG) primary reciprocation systems on root dentine microcrack formation and to know the effect of TruNatomy Glider (TRNG) with TruNatomy (TRN) prime rotary systems on root dentine microcrack formation. METHODS: In this study, 40 extracted mandibular first molar roots were selected and divided randomly into four groups (n=10). Group MWOG: a manual glide path was performed + WOG primary. Group MTRN: manual glide path performed+TRN prime. Additionally, group WOGG: glide path preparation with WOGG+WOG primary. Finally, for group TRNG, the glide path preparation was performed with TRNG+TRN prime. Micro-CT was used for pre and post-instrumentation image analysis. Statistical analysis was performed using the Kruskal- Wallis test (p<0.05) with Two-way ANOVA. RESULTS: The Kruskal-Wallis test showed no significant differences among all groups in all thirds for pre and post-instrumentation regarding the crack formation. The Two-way ANOVA showed no significant difference or interaction between the ways of glide path preparation, whether manual or reciprocal WOGG, or between the rotary TRNG and the motion used in root canal preparation (rotary TRN or reciprocal WOG) regarding the crack formation and propagation. CONCLUSION: Microcrack formation and propagation occurred independently of using different glide path techniques (manual, rotary, or reciprocal).

Clinical relevance of distolingual roots and periodontal status in mandibular first molars: a cross-sectional study employing CBCT analysis. / ä¸‹é¢Œç¬¬ä¸€ç£¨ç‰™è¿œèˆŒæ ¹çš„å­˜åœ¨ä¸Žç‰™å‘¨çŠ¶æ€çš„ä¸´åºŠç›¸å ³æ€§åˆ†æžï¼šä¸€é¡¹é‡‡ç”¨é”¥å½¢å°„æŸç”µè„‘æ–­å±‚æ‰«æåˆ†æžçš„æ¨ªæ–­é¢ç ”ç©¶.

OBJECTIVES: Distolingual root of the permanent mandibular first molar (PMFM-DLR) has been frequently reported, which may complicate the treatment of periodontitis. This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background. MATERIALS AND METHODS: A total of 836 cone beam computed tomography (CBCT) images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China. Among them, complete periodontal charts were available for 69 Chinese patients with 103 teeth. Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR, bone loss, and periodontal clinical parameters, including clinical attachment loss (CAL), probing pocket depth (PPD), gingival recession (GR), and furcation involvement (FI). RESULTS: The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4% and 26.3%, respectively. Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section, while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section. CONCLUSIONS: The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort. The morphological features of DLR were correlated with the periodontal status of mandibular first molars. This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.

Micro-computed tomographic evaluation of the shaping ability of three nickel-titanium rotary systems in the middle mesial canal of mandibular first molars: an ex vivo study based on 3D printed tooth replicas.

BACKGROUND: The preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas. METHODS: A permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer's recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey's post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots. RESULTS: As compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05). CONCLUSIONS: 3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Microcomputed tomographic evaluation of 6 NiTi files on the pericervical dentin and the smallest dentin thickness zones in mesial root canals of mandibular molars: an in vitro study.

OBJECTIVE: The aim of this study was to evaluate six files on the pericervical dentin (PCD) and the smallest dentin thickness zones (SDTZ) in mesial root canals of mandibular molars. MATERIALS AND METHODS: Sixty mandibular molars with two mesial canals and Vertucci configuration were aleatory allocated in 6 experimental groups of 10 molars and 20 root canals. Specimens were scanned before instrumentation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WaveOne Gold (WG), group 2 with Reciproc Blue (RB), group 3 with TRUShape (TS), group 4 with XP-endo Shaper (XP), group 5 with iRace (IR), and group 6 with TruNatomy (TN). After instrumentation, the molars were scanned again and the images recorded were reconstructed with the NRecon v.1.7 (Bruker micro-CT) and analyzed with CTAn v.1.20.8 software (Bruker micro-CT) quantifying the changes produced in the surface, volume, structure thickness, SMI, and centroids at the Pericervical Dentin area of the root canals (PCD) located from the root canal orifices at the floor of the pulp chamber to 4 mm in the apical direction, and the changes in the Smallest Dentin Thickness Zones (SDTZ) located (from the furcation to 4 mm and 7 mm in the apical direction. The data obtained were compared using Wilcoxon and ANOVA with a 5% significance level. RESULTS: XP and TN were similar in all the parameters (P >.05) at the PCD, but TN showed significant differences from WG, RB, TS, and IR (P <.05), while XP showed significant differences from WG (P <.05) in volume, surface, and structure thickness. Regarding the changes in the SDTZ, the amount of dentin removed was similar between the groups in both canals at the middle 1/3, at the cervical 1/3 for MB canals, and in ML canals for RB, TS, XP, IR, and TN (P>.05). The action of WG was significantly different from that of XP and TN in the cervical 1/3 of the ML canal (P <.05). CONCLUSIONS: XP and TN rotatory files with small taper and volume maintained better with minor changes at the PCD and SDTZ, while WG reciprocation file produced the largest change. All the files were maintained centered at the PCD, and their performances were safe with a minimal thickness higher 0.5 mm at the SDTZ, and without risk of perforation. TRIAL REGISTRATION: No clinical trials were indicated in this study. CLINICAL RELEVANCE: The choice of endodontic files is a relevant factor in the conservative performance of root canal treatments.

Microcomputed-Tomographic Analysis of the Root Canal Morphology of the Mandibular First Molars in a Malaysian Subpopulation Using Two Classification Systems / Análisis por Tomografía Microcomputada de la Morfología del Conducto Radicular de los Primeros Molares Mandibulares en una Subpoblación de Malasia Utilizando dos Sistemas de Clasificación

SUMMARY: This work investigated the morphology of the root canal system of the mandibular first molar in a Malaysian subpopulation. Using micro-computed tomography with an isotropic resolution of 22 µm, 140 mandibular first molars were scanned. MIMICS software was used for segmentation, 3-D reconstruction and analysis of the acquired images. The canal configuration was described using Vertucci [supported by the supplementary configurations proposed by Sert & Bayirli (2004)] and Ahmed et al. (2027), coding systems. The chi-square test was used to assess the association between qualitative variables. By non-considering intercanal communications, Vertucci types IV (17.1%) and I (76.4%) were the most frequently reported configurations in the mesial and distal roots, respectively. Of the reported configurations, 24.3% and 4.3% were non-classifiable by Vertucci system in the mesial and distal roots, respectively. Up to 63.6% and 9.3% of the reported configurations were non- classifiable, and type I was the most frequent when considering intercanal communications (7.1% and 76.4% in the mesial and distal roots, respectively). According to Ahmed et al., system, almost half of the sample had more than four digits (47.9%), followed by the 3-digits category (20.71%). In both systems, a significant association was found between the canal configuration and the root type (p<0.001). The mandibular first molar of this Malaysian subpopulation demonstrated a wide range of root canal morphology. When compared to the Vertucci system, the system developed by Ahmed et al., successfully classified all molars configurations despite their level of complexity. The complex canal anatomy of mandibular first molars in this subpopulation warrants special attention during root canal treatment procedures.

En este trabajo se investigó la morfología del sistema de conductos radiculares del primer molar mandibular en una subpoblación de Malasia. Utilizando tomografía microcomputada con una resolución isotrópica de 22 µm, se escanearon 140 primeros molares mandibulares. Se utilizó el software MIMICS para segmentar (enmascarar), reconstruir en 3D, visualizar y analizar las imágenes adquiridas. La configuración del canal se describió utilizando Vertucci respaldado por las configuraciones complementarias propuestas por Sert & Bayirli (2004)] y Ahmed et al. (2017, 2020), sistemas de codificación. Se utilizó la prueba de chi-cuadrado para evaluar la asociación entre variables cualitativas. Sin considerar las comunicaciones intercanales, los tipos Vertucci IV (17,1%) y I (76,4%) fueron las configuraciones reportadas con mayor frecuencia en las raíces mesiales y distales, respectivamente. De las configuraciones reportadas, el 24,3 % y el 4,3 % fueron no clasificables por el sistema de Vertucci en las raíces mesial y distal, respectivamente. Hasta el 63,6 % y el 9,3 % de las configuraciones reportadas fueron no clasificables, siendo la tipo I la más frecuente al considerar las comunicaciones intercanales (7,1 % y 76,4 % en las raíces mesiales y distales, respectivamente). Según Ahmed et al. (2017, 2020) en el sistema, casi la mitad de la muestra tenía más de cuatro dígitos (47,9 %), seguido por la categoría de 3 dígitos (20,71 %). En ambos sistemas se encontró una asociación significativa entre la configuración del canal y el tipo de raíz (p<0,001). El primer molar mandibular de esta subpoblación de Malasia demostró una amplia gama morfológica del conducto radicular. En comparación con el sistema Vertucci, el sistema desarrollado por Ahmed et al. (2017, 2020) clasificaron con éxito todas las configuraciones de los molares a pesar de su nivel de complejidad. La compleja anatomía del canal de los primeros molares mandibulares en esta subpoblación merece una atención especial durante los procedimientos de tratamiento de conducto.

Age estimation by pulp canal/root ratio in Yorkshire terrier dogs.

Background: The study of the morphological parameters of teeth on dental radiographic images, especially evaluation of the pulp canal/root ratio (PCRR), has been presented as a reliable method to estimate age both in humans and animals. Evaluating PCRR involves a simple, nondestructive procedure that can be used both in living individuals and in cadavers. There is a scarcity of studies assessing the relationship between PCRR and age in dogs (Canis lupus familiaris). Objective: The aim of this study was to evaluate the relationship between PCRR and age in Yorkshire terrier dogs. Animals and procedures: Dental radiographs of 53 Yorkshire terrier dogs from the database of the Odontovet Veterinary Dentistry Center (Brazil) were analyzed. Using ImageJ software, 3 consecutive measurements of the widths of 2 roots (mesial and distal) and their respective pulp canals were taken at both mandibular molar teeth (left, 309 and right, 409). The PCRR was then calculated using width means. Results: The PCRR decreased with increasing age in both mesial (0.21 ± 0.09 in animals aged < 24 mo, 0.12 ± 0.04 in animals aged between 25 and 96 mo, and 0.09 ± 0.03 in dogs aged > 96 mo) and distal (0.24 ± 0.11, 1.01 ± 0.03, and 0.09 ± 0.03, by the same order) roots. A statistically significant, moderate negative correlation was demonstrated between age and PCRR of the mesial [rs (97) = -0.545; P < 0.001] and distal [rs (98) = -0.578; P < 0.001] roots. Conclusion and clinical relevance: This work contributes to the knowledge of PCRR in dogs and its relationship with age, paving the way for further studies using larger samples in different canine breeds.

Estimation de l'âge par le rapport canal pulpaire/racine chez des chiens de race Yorkshire. Contexte: L'examen des paramètres morphologiques des dents sur des radiographies dentaires, particulièrement l'évaluation du rapport canal pulpaire/racine (PCRR), a été présenté comme une méthode fiable d'estimer l'âge chez les humains et les animaux. L'évaluation du PCRR est faite au moyen d'une procédure simple et non-destructive qui peut être utilisée autant chez les individus vivants que sur des cadavres. Il y a peu d'études évaluant la relation entre le PCRR et l'âge chez les chiens (Canis lupus familiaris). Objectif: L'objectif de la présente étude était d'évaluer la relation entre le PCRR et l'âge chez des chiens de race Yorkshire. Animaux et procédures: Les radiographies dentaires de 53 chiens de race Yorkshire provenant de la base de données du Centre de dentisterie vétérinaire Odontovet (Brésil) ont été analysées. À l'aide du logiciel ImageJ, 3 mesures consécutives de la largeur de 2 racines (mésiale et distale) et de leur canal pulpaire respectif ont été prises au niveau des dents molaires mandibulaires (gauche, 309 et droite, 409). Le PCRR a par la suite été calculé utilisant les moyennes des largeurs. Résultats: Le PCRR diminuait avec une augmentation de l'âge autant pour la racine mésiale (0,21 ± 0,09 chez les animaux âgés de < 24 mo, 0,12 ± 0,04 chez les animaux âgés entre 25 et 96 mo, et 0,09 ± 0,03 chez les chiens de > 96 mo) que pour la racine distale (0,24 ± 0,11, 1,01 ± 0,03, 0,09 ± 0,03, dans le même ordre d'âge). Une différence statistiquement significative, corrélation modérément négative a été mise en évidence entre l'âge et le PCRR pour la racine mésiale [rs (97) = −0,545; P < 0,001] et la racine distale [rs (98) = −0,578; P < 0,001]. Conclusion et pertinence clinique: Cette étude contribue à la connaissance du PCRR chez les chiens et sa relation avec l'âge, ouvrant la voie à des études ultérieures avec un échantillonnage plus grand et différentes races de chien.(Traduit par Dr Serge Messier).

Spontaneous space closure in patients treated with early extraction of the first permanent molar: a retrospective cohort study using radiographs.

OBJECTIVES: To assess the success rate of spontaneous space closure after extraction of the first permanent molar (FPM) in the maxilla and the mandible, and to identify the factors that make spontaneous space closure most favorable in each. MATERIALS AND METHODS: A retrospective records-based cohort study was conducted through a search of the database of the Public Dental Service, Stockholm County Council, Stockholm, for young adults born between 2000 and 2001, who underwent extraction of one or more FPM between 2006 and 2016. A total of 995 extracted teeth were identified, of which 203 teeth in 155 patients met the inclusion criteria. RESULTS: Of the 203 extracted teeth, 166 (81.8%) did not receive any orthodontic treatment. The success rate for space closure in orthodontically treated patients was 91.9%. The success rate for spontaneous space closure was 84.3%. All unsuccessful spontaneous space closure in the maxilla occurred in patients older than 12 years. The dental developmental stage of the second permanent molar (SPM) had a statistically significant association with spontaneous space closure in the mandible (P < .001). CONCLUSIONS: The success rate of spontaneous space closure was high (84.3%) and was higher in the maxilla (94.1%) than the mandible (74.1%). Age at time of extraction and dental developmental stage of the SPM were significant factors for successful spontaneous space closure in the maxilla and mandible, respectively.

The osteoclastic activity in apical distal region of molar mesial roots affects orthodontic tooth movement and root resorption in rats.

The utilization of optimal orthodontic force is crucial to prevent undesirable side effects and ensure efficient tooth movement during orthodontic treatment. However, the sensitivity of existing detection techniques is not sufficient, and the criteria for evaluating optimal force have not been yet established. Here, by employing 3D finite element analysis methodology, we found that the apical distal region (A-D region) of mesial roots is particularly sensitive to orthodontic force in rats. Tartrate-resistant acidic phosphatase (TRAP)-positive osteoclasts began accumulating in the A-D region under the force of 40 grams (g), leading to alveolar bone resorption and tooth movement. When the force reached 80 g, TRAP-positive osteoclasts started appearing on the root surface in the A-D region. Additionally, micro-computed tomography revealed a significant root resorption at 80 g. Notably, the A-D region was identified as a major contributor to whole root resorption. It was determined that 40 g is the minimum effective force for tooth movement with minimal side effects according to the analysis of tooth movement, inclination, and hyalinization. These findings suggest that the A-D region with its changes on the root surface is an important consideration and sensitive indicator when evaluating orthodontic forces for a rat model. Collectively, our investigations into this region would aid in offering valuable implications for preventing and minimizing root resorption during patients' orthodontic treatment.

Impact of molar teeth distalization by clear aligners on maxillary alveolar bone thickness and root resorption: a three­dimensional study.

OBJECTIVE: This study aimed to evaluate the impact of molar teeth distalization movement by clear aligners on changes in the alveolar bone thickness and orthodontically induced inflammatory root resorption (OIIRR) in maxillary molars using conebeam computed tomography (CBCT). MATERIALS AND METHODS: Three-dimensional CBCT scans of 35 adult patients (one hundred forty maxillary molars) with pre-designed selection criteria and a mean age of 24.4 ± 7.1 years were included. The measured parameters, including alveolar bone thickness for maxillary molars and root resorption (OIIRR), were analyzed using pre-and post-treatment CBCT (T0 and T1, respectively) with Invivo 6.0 software. RESULT: Post-treatment, relevant statistically significant changes included deposition of bone in the average palatal surface of the 1st molars. The reduction of bone was seen in the average buccal surface of the first molars and both surfaces of the second molars. Regarding root length after treatment, the average maxillary 1st molar roots showed significant OIIRR (p < 0.001). CONCLUSION: Clear aligner treatment could effectively reduce the incidence of alveolar bone thickness reduction and OIIRR in treating Class II malocclusions compared to conventional braces, as shown in previous studies. This research will aid in fully grasping the benefits of clear aligners.

Marginal adaptation of bulk-fill resin composites with different viscosities in class II restorations: a micro-CT evaluation.

BACKGROUND: The purpose of this study is to evaluate the marginal adaptation of bulk-fill resin composites with different viscosities (paste-like and flowable) in Class II restorations using micro-CT imaging. METHODS: Forty extracted human molars were used. Mesial and distal Class II box cavities (approximately 3 mm x 3 mm x 4 mm) were prepared for each tooth, with cavity floors located 1 mm below the enamel-cementum junction. Following adhesive application, teeth were restored using eight different groups: Group XB: X-tra Base Bulk-fill Flowable (VOCO), Group XF: X-tra Fill Bulk-fill (VOCO), Group FB: Filtek Bulk-fill Posterior (3 M ESPE), Group FF: Filtek Bulk-fill Flowable (3 M ESPE), Group BB: Beautifil-Bulk (SHOFU), Group BF: Beautifil-Bulk Flowable (SHOFU), and Group CO: "as a control group", Clearfil Majesty Posterior (KURARAY) and Group CF: "as a control group", Clearfil Majesty Flow + Clearfil Majesty Posterior (KURARAY). The restored teeth underwent an aging protocol involving 1000 cycles in a water bath fluctuating between 5 ± 1.0 °C and 55 ± 1.0 °C. Post-aging, teeth were immersed in 50% silver nitrate solution for 24 h and then in a film developer solution for 8 h. Microleakage analysis was performed using micro-CT, evaluated with 3D Slicer software. A two-way ANOVA was employed for statistical analysis. RESULTS: Two-way ANOVA results indicated significant effects of both viscosity (p < 0.0001) and composite type (p < 0.0001) on marginal adaptation. Viscosity analysis (comparing flowable and paste-like) revealed no significant differences in the FB-FF, XB-XF and BB-BF groups but significant differences in the and CO-CF group, with flowable type exhibiting less microleakage than paste-like type. CONCLUSIONS: The study suggests that while the viscosity of bulk-fill composites did not significantly affect marginal adaptation, the brand of bulk-fill composite did influence it.

Premature loss of primary molars in children: space recovery through molar distalisation. A literature review.

AIM: The integrity of primary dentition is essential in the development of the jaws and permanent occlusion. The consequences of a premature loss of primary molars are: space loss, crowding, risk of impaction of the permanent teeth, ectopic eruption, anomalous inclination of the teeth adjacent to the loss molar, reduction of arch length. The mesial displacement of the posterior permanent teeth during eruption can cause a loss of space, which can be regained with orthodontic appliances. Therefore, a careful diagnosis is of great importance to be able to decide what appliance is indicated to recover from this situation. Molar distalisation consists in displacing permanent molars distally, allowing them to reach class I relationship and to recover the correct space for the second bicuspids when the second deciduous molar has been lost early. METHODS: The aim of this study is to carry out a narrative literature review regarding the different appliances and their effectiveness in regaining space after premature loss of the upper primary molars. CONCLUSION: The paediatric dentist should be aware of the advantages and disadvantages related to each device and select the most appropriate distalisation appliance based on an individual plan of diagnosis and a careful treatment. The distalisation of the upper molar must be adequately stabilised and so it is important to consider also some retainers such as Nance's appliance, the Palatal Plate, the extraoral traction, the utility arch, or II Class elastic bands.

Effects of different patterns of movement for correcting a deep curve of Spee with clear aligners on the anterior teeth: a finite element analysis.

OBJECTIVE: To analyse the anterior teeth effects of clear aligners on five different patterns of mandibular molar movement and to define the most effective configuration to be implemented with clear aligners through finite element analysis. METHODS: A three-dimensional mandibular model with a deep overbite in the mandible was constructed using cone beam computerized tomography (CBCT) data. The model included the mandibular dentition, mandibular periodontal ligaments, attachments, and aligners. Five models were created: (1) configuration A: second molar distalization (0.25 mm); (2) configuration B: second molar distalization (0.25 mm), first molar extrusion (0.15 mm); (3) configuration C: second molar distalization (0.25 mmm), first and second premolar extrusion(0.15 mm); (4) configuration D: second molar distalization (0.25 mm), first molar and first/second premolar extrusion(0.15 mm); and (5) configuration E: second molar distalization (0.25 mm), first molar and first/second premolar extrusion (0.15 mm), first molar and first/second premolar expansion (0.15 mm). RESULTS: In all configurations, the anterior teeth exhibited labial tipping and the mandibular central incisor of configuration E showed the highest labial tipping. Configuration E demonstrated a relatively minor impact on mandibular molars distalization compared with configuration A. Configuration A showed the highest distal displacement value, and configuration E produced the lowest displacement value. Configuration E caused the highest periodontal ligament (PDL) pressure of the central and lateral incisors. The differences in the canines between configurations C and D,were not significant, and the stress distribution differed among the five groups. CONCLUSIONS: All patterns utilizing clear aligners facilitated mandibular molar distalization. Extruding the premolars and second molar distalization at the same time had little impact on second molar distalization; When expansion and extrusion were simultaneously performed during the distalization of mandibular molars, our prime consideration was the alveolar bone on the labial side of the anterior teeth to prevent the occurrence of gingival recession, dehiscence, and fenestration. Due to the lack of consideration for periodontal tissues in this study, clinical protocols should be designed based on the periodontal status of the mandibular anterior teeth.

Retrospective study of the morphology of third maxillary molars among the population of Lower Silesia based on analysis of cone beam computed tomography.

INTRODUCTION: Understanding the anatomy of root canal systems and being aware of their variations is crucial for successful endodontic treatment. Specifically, the intricate and diverse nature of the root anatomy in maxillary third molars poses a significant challenge for dental clinicians. The study analyzed the morphology of the root canal system in maxillary third molars among residents of the Lower Silesia region in Poland using cone beam computed tomography (CBCT). MATERIAL AND METHODS: This retrospective cross-sectional imaging study was conducted at the X-Ray Diagnostics Laboratory of the Academic Dental Polyclinic of Wroclaw Medical University, Poland. The study evaluated 316 CBCT scans and included 196 maxillary third molars. They were obtained from 118 females and 78 males over the age of 18, in the period from January to April 2022 (three consecutive months). The number of roots, root canals, and root canal configurations according to Vertucci's classification were analyzed. RESULTS: Three-rooted maxillary molars were found most often (64.29%), followed by single-rooted (24.49%), two-rooted (7.65%), and four-rooted (3.57%) teeth. Among all the roots examined, Vertucci Type I root canals were the most prevalent. Our research found that single-rooted forms (40 teeth, 33.89% vs. 8 teeth, 10.26%, p = 0.0013) of maxillary third molars were significantly more common in females than in males. However, three-rooted forms (62 teeth, 79.49% vs. 64 teeth, 54.24%, p = 0.0013) of maxillary third molars were significantly more common in males than in females. DISCUSSION: In the Lower Silesia region, the typical maxillary third molar in the Polish population has a three-rooted structure with Vertucci Type I root canal configuration. We noted a sex-dependent correlation in maxillary third molar morphology, with single-rooted forms more prevalent in women and three-rooted forms in men.

Occurrence and distribution of lost molars and furcation defects in a Bulgarian population: A retrospective three-dimensional study.

OBJECTIVES: To identify the ocuurrence, distribution, and factors associated with lost molars and furcation defects in a sample of the Bulgarian population. MATERIAL AND METHODS: The full mouth cone-beam computed tomography of 56 male and 57 female patients, aged between 19 and 84 years, were examined. A comprehensive evaluation was performed on a total of 675 molars-339 in maxilla and 336 in mandible. Associations with variables such as age, gender, and periodontal disease were analyzed. RESULTS: With aging the number of missing teeth and interradicular lesions increased. No significant links between gender and molar loss (p = .64) or gender and furcation involvement (p = .25) was found. Periodontitis was strongly associated with both studied dental problems (p < .001). The occurrence of furcation defects was more frequently observed in the maxilla than in the mandible. CONCLUSION: The occurrence and distribution of lost molars and furcation defects is substantial within the studied sample. Further investigation with a larger patient cohort is needed. Pertinent healthcare strategies to address the observed dental health issues also have to be developed.